Characterization of the heat transfer coefficient at near solidus forming condition using columnar pressing test

Muhammad Sajjad, Julen Agirre, Gorka Plata, Jokin Lozares, Joseba Mendiguren

The International Journal of Advanced Manufacturing Technology, 2024 Oct

Tool surface texturing by shot peening: initial results and lessons learned

Eneko Sáenz de Argandoña, Markel Mendez, Joseba Mendiguren, Alaitz Zabala

IOP Conference Series: Materials Science and Engineering, vol. 1307, IOP Publishing, 2024 May, p. 012017

Anisotropic plasticity and fracture modelling of cold rolled AA5754

Borja Erice, Bernard Rolfe, Joseba Mendiguren

Engineering Fracture Mechanics, vol. 289, 2023

In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel

Simon Vitzthum, Joana Rebelo Kornmeier, Michael Hofmann, Maximilian Gruber, Roman Norz, Emad Maawad, Joseba Mendiguren, Wolfram Volk

Materials Science and Engineering: A, vol. 857, 2022

Numerical study of advanced friction modelling for sheet metal forming: Influence of the die local roughness

Alaitz Zabala, Eneko Sáenz de Argandoña, Daniel Cañizares, Iñigo Llavori, Nagore Otegi, Joseba Mendiguren

Tribology International, vol. 165, 2022

Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes

Junhe Lian, Wenqi Liu, Xabier Gastañares, Rongfei Juan, Joseba Mendiguren

International Journal of Material Forming, vol. 15, 2022

Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminium alloy

Wenqi Liu, Nagore Otegi, Ana Orallo, Manex Barrenetxea, Iosu Aizpuru, Junhe Lian, Joseba Mendiguren

Materials Science and Engineering: A, vol. 852, 2022

A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires

I. Llavori, A. Zabala, J. Mendiguren, X. Gómez

International Journal of Fatigue, vol. 143, 2021

Contact pressure and sliding velocity ranges in sheet metal forming simulations

Joseba Cillaurren, Lander Galdos, Mario Sanchez, Alaitz Zabala, Eneko Saenz de Argandoña, Joseba Mendiguren

ESAFORM 2021 - 24th International Conference on Material Forming, 2021

Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes

Lander Galdos, Nagore Otegi, Joseba Mendiguren, Javier Trinidad, Eneko Saenz de Argandoña

ESAFORM 2021 - 24th International Conference on Material Forming, 2021

Initiation of dynamic recrystallization of as-cast N08028 alloy

Elena Mora, Aitor Navarro, Elena Silveira, Cecilia Poletti, Joseba Mendiguren, Iñaki Hurtado

ESAFORM 2021 - 24th International Conference on Material Forming, 2021

New drawbead tester and numerical analysis of drawbead closure force

Imanol Gil, Joseba Mendiguren, Lander Galdos, Endika Mugarra, Eneko Saenz de Argandoña

International Journal of Advanced Manufacturing Technology, vol. 116, 2021, pp. 1855 – 1869

Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

Lander Galdos, Julen Agirre, Nagore Otegi, Joseba Mendiguren, Eneko Saenz de Argandoña

Minerals, Metals and Materials Series, 2021, pp. 773 – 787

The interaction between the sheet/tool surface texture and the friction/galling behaviour on aluminium deep drawing operations

Alaitz Zabala, Lander Galdos, Chris Childs, Iñigo Llavori, Andrea Aginagalde, Joseba Mendiguren, Eneko Saenz de Argandoña

Metals, vol. 11, 2021

Aluminum springback reduction by post-forming electric pulses

Ana Orallo, Javier Trinidad, Lander Galdos, Eneko Sáenz de Argandoña, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 1387 – 1391

A review of the effects of cyclic contact loading on fretting fatigue behavior

F. Abbasi, G.H. Majzoobi, J. Mendiguren

Advances in Mechanical Engineering, vol. 12, 2020

A simple device to measure bend limit of sheet metals

A. Deole, N. Etxebarria, J. Mendiguren, A. Ilinich, M. Weiss

IOP Conference Series: Materials Science and Engineering, vol. 967, 2020

Experimental and numerical simulation investigation on deep drawing process of inconel 718 with and without intermediate annealing thermal treatments

Unai Ulibarri, Lander Galdos, Eneko Sáenz de Argandoña, Joseba Mendiguren

Applied Sciences (Switzerland), vol. 10, 2020

Strain rate effect on the fracture behavior of the AA5754 aluminum alloy

Maddi Bueno, Lander Galdos, Eneko Sáenz de Argandoña, Matthias Weiss, Bernard Rolfe, Yanshan Lou, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 1264 – 1269

The effect of material surface roughness in aluminum forming

Eneko Sáenz de Argandoña, Alaitz Zabala, Lander Galdos, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 591 – 595

The influence of the kinematic hardening on the FEM simulation of tension levelling process

Aitor Garcia, Javier Trinidad, Nagore Otegi, Joseba Mendiguren, Eneko Saenz de Argandoña, Elena Silvestre, Lander Galdos

Procedia Manufacturing, vol. 47, 2020, pp. 1381 – 1386

Towards the automation of the die spotting process: Contact blue pattern decryption

Alaitz Zabala, Iñigo Llavori, Eneko Sáenz de Argandoña, Joseba Mendiguren

Journal of Manufacturing Processes, vol. 58, 2020, pp. 1285 – 1296

A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region

Paul M. Souza, Joseba Mendiguren, Qi Chao, Hossein Beladi, Peter D. Hodgson, Bernard Rolfe

Materials Science and Engineering: A, vol. 748, 2019, pp. 30 – 37

Numerical prediction of force and energy consumption in roll forming processes

Eneko Saenz De Argandoña, Joseba Mendiguren, Lander Galdos, Nagore Otegi, Javier Trinidad, Alain Armendariz

AIP Conference Proceedings, vol. 2113, 2019

Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels

Ángela Mangas, Iñaki Eguía, Jon Ezkerra, Joseba Mendiguren, Zaloa Arechabaleta

AIP Conference Proceedings, vol. 2113, 2019

Drawbead uplift force analytical model for deep drawing operations

I. Gil, L. Galdos, J. Mendiguren, N. Otegi, E. Saenz De Argandona

Journal of Physics: Conference Series, vol. 1063, 2018

Hardening prediction of diverse materials using the Digital Image Correlation technique

Julen Agirre, Lander Galdos, Eneko Saenz de Argandoña, Joseba Mendiguren

Mechanics of Materials, vol. 124, 2018, pp. 71 – 79

Improving the prediction of the final part geometry in high strength steels U drawing by means of advanced material and friction models

Eneko Saenz De Argandoña, Joseba Mendiguren, Irune Otero, Endika Mugarra, Nagore Otegi, Lander Galdos

AIP Conference Proceedings, vol. 1960, 2018

Influence of roll levelling on material properties and postforming springback

Lander Galdos, Joseba Mendiguren, Eneko Saenz De Argandoña, Nagore Otegi, Elena Silvestre

AIP Conference Proceedings, vol. 1960, 2018

On the accurate characterization of the drawbead up-lift forces

I. Gil, L. Galdos, N. Otegi, J. Mendiguren, E. Saenz De Argandona

IOP Conference Series: Materials Science and Engineering, vol. 418, 2018

On the plastic flow rule formulation in anisotropic yielding aluminium alloys

Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña

International Journal of Advanced Manufacturing Technology, vol. 99, 2018, pp. 255 – 274

Press hardening of alternative materials: conventional high- strength steels

Joseba Mendiguren, Nuria Herrero-Dorca, Eneko Saenz de Argandoña, Lander Galdos

International Journal of Material Forming, vol. 11, 2018, pp. 663 – 670

Bending behaviour and oil canning in roll forming a steel channel

Matthias Weiss, Buddhika Abeyrathna, Desinghe Shiromani Gangoda, Joseba Mendiguren, Henry Wolfkamp

International Journal of Advanced Manufacturing Technology, vol. 91, 2017, pp. 2875 – 2884

Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions

Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Ritanjali Sethy, Julen Agirre

Procedia Engineering, vol. 207, 2017, pp. 2239 – 2244

Cost efficiency of the non-associative flow rule simulation of an industrial component

Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren

AIP Conference Proceedings, vol. 1896, 2017

Evolution of elastic modulus in roll forming

A. Abvabi, J. Mendiguren, A. Kupke, B. Rolfe, M. Weiss

International Journal of Material Forming, vol. 10, 2017, pp. 463 – 471

Friction and Heat Transfer Coefficient Determination of Titanium Alloys during Hot Forging Conditions

Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz de Argandoña

Advanced Engineering Materials, vol. 19, 2017

Hole expansion test of third generation steels

Julen Agirre, Joseba Mendiguren, Lander Galdos, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1896, 2017

Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model

L. Galdos, E Saenz De Argandona, J. Mendiguren, E. Silvestre

Journal of Physics: Conference Series, vol. 896, 2017

Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models

Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Imanol Gil, Unai Ulibarri, Endika Mugarra

Procedia Engineering, vol. 207, 2017, pp. 137 – 142

U-drawing of Fortiform 1050 third generation steels. Numerical and experimental results

E. Saenz De Argandona, L. Galdos, J. Mendiguren, I. Otero, E. Mugarra

Journal of Physics: Conference Series, vol. 896, 2017

An analytical model for web-warping in variable width flexible roll forming

Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Matthias Weiss

International Journal of Advanced Manufacturing Technology, vol. 86, 2016, pp. 1541 – 1555

Energy efficient servo controlled roll levelling machines

Eneko Sáenz De Argandoña, Elena Silvestre, Daniel Garcia, Joseba Mendiguren, Lander Galdos

Key Engineering Materials, vol. 716, 2016, pp. 413 – 419

Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures

Joseba Mendiguren, Rafael Ortubay, Eneko Saenz De Argandonã, Lander Galdos

Applied Thermal Engineering, vol. 99, 2016, pp. 813 – 824

Friction characterisation in levelling processes

Unai Ulibarri Hernández, Joseba Mendiguren, Eneko Sáenz de Argandoña, Lander Galdos, Elena Silvestre, Imanol Gil

Advances in Materials and Processing Technologies, vol. 2, 2016, pp. 503 – 513

Hot stamping of AA7075 aluminum sheets

J. Mendiguren, .E Saenz De Argandona, L. Galdos

IOP Conference Series: Materials Science and Engineering, vol. 159, 2016

Identification of friction coefficient in forging processes by means t-shape tests in high temperature

Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña

Key Engineering Materials, vol. 716, 2016, pp. 165 – 175

Influence of material and tribological modelling on the prediction of big size automotive components springback

Imanol Gil, Endika Mugarra, Julen Aguirre, Joseba Mendiguren, Eneko Sáenz De Argandoña, Lander Galdos

Key Engineering Materials, vol. 716, 2016, pp. 713 – 718

Influence of material's hardening behaviour of DP1000 on numerical springback prediction

Imanol Gil, Elena Silvestre, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña, Eric Hug

AIP Conference Proceedings, vol. 1769, 2016

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

Imanol Gil, Joseba Mendiguren, Lander Galdos, Endika Mugarra, Eneko Saenz de Argandoña

Tribology International, vol. 103, 2016, pp. 266 – 273

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

Imanol Gil, Lander Galdos, Joseba Mendiguren, Endika Mugarra, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016

Influence of the tool temperature increment on the coefficient of friction behavior on the deep drawing process of HSS

I. Gil, L. Galdos, E. Mugarra, J. Mendiguren, E Saenz De Argandoña

IOP Conference Series: Materials Science and Engineering, vol. 159, 2016

Investigation of influencing factors on friction during ring test in hot forging using FEM simulation

Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016

Press hardening of alternative high strength aluminium and ultra-high strength steels

Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, Lander Galdos, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016

Roll levelling semi-analytical model for process optimization

E. Silvestre, D. Garcia, L. Galdos, E. Saenz De Argandoña, J. Mendiguren

Journal of Physics: Conference Series, vol. 734, 2016

Sensitivity analysis on an AC600 aluminum skin component

J. Mendiguren, J. Agirre, E. Mugarra, L. Galdos, E. Saenz De Argandoña

Journal of Physics: Conference Series, vol. 734, 2016

An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width

Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Matthias Weiss

International Journal of Mechanical Sciences, vol. 90, 2015, pp. 228 – 238

Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels

E. Silvestre, J. Mendiguren, L. Galdos, E. Sáenz De Argandoña

International Journal of Mechanical Sciences, 101-102, 2015, pp. 10 – 20

Comparison of three methods for material hardening parameter identification under cyclic tensioncompression loadings: Roll levelling case study

Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdos, Joseba Mendiguren

Key Engineering Materials, 651-653, 2015, pp. 957 – 962

Determination of heat transfer coefficients for different initial tool temperatures and closed loop controlled constant contact pressures

Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, José Miguel Martín, Lander Galdos, Eneko Sáenz De Argandoña

Key Engineering Materials, 651-653, 2015, pp. 1537 – 1542

Determination of heat transfer coefficients under closed loop controlled constant contact pressures

Lander Galdos, Eneko Sáenz De Argandoña, Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, José Miguel Martín

Computer Methods in Materials Science, vol. 15, 2015, pp. 58 – 64

Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels

Erik J. Pavlina, Chengjiang Lin, Joseba Mendiguren, Bernard F. Rolfe, Matthias Weiss

Journal of Materials Engineering and Performance, vol. 24, 2015, pp. 3737 – 3745

Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests

Joseba Mendiguren, Fernando Cortés, Xabier Gómez, Lander Galdos

Materials Science and Engineering: A, vol. 634, 2015, pp. 147 – 152

Improvement of accuracy in a free bending test for material characterization

Joseba Mendiguren, Armin Abvabi, Bernard Rolfe, Matthias Weiss

International Journal of Mechanical Sciences, vol. 103, 2015, pp. 288 – 296

Numerical simulation of the roll levelling of DP1000 steel using a nonlinear combined hardening material model

Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdos, Joseba Mendiguren

Computer Methods in Materials Science, vol. 15, 2015, pp. 44 – 50

On the definition of an kinematic hardening effect graph for sheet metal forming process simulations

Joseba Mendiguren, Bernard Rolfe, Matthias Weiss

International Journal of Mechanical Sciences, vol. 92, 2015, pp. 109 – 120

Room temperature forming of AA7075 aluminum alloys: W-Temper process

Eneko Sáenz De Argandoña, Lander Galdos, Rafael Ortubay, Joseba Mendiguren, Xabier Agirretxe

Key Engineering Materials, 651-653, 2015, pp. 199 – 204

Tailor tempering and hot-spotting of press hardened boron steels

Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Nuria Herrero, Rafeel Ortubay, Xabier Agirretxe, José Miguel Martín

Key Engineering Materials, 651-653, 2015, pp. 789 – 795

W-temper forming of AA7075 aluminum alloys as an alternative to the warm and hot stamping

Eneko Sáenz De Argandoña, Lander Galdos, Rafael Ortubay, Joseba Mendiguren, Xabier Agirretxe

Computer Methods in Materials Science, vol. 15, 2015, pp. 51 – 57

Characterization of a dual phase steel using tensile and free bending tests

Joseba Mendiguren, Stijn Hanselman, Eisso Atzema, Peter Hodgson, Bernard Rolfe, Matthias Weiss

AIP Conference Proceedings, vol. 1567, 2014, pp. 659 – 662

Springback investigation in roll forming of a V-section

Akbar Abvabi, Joseba Mendiguren, Bernard Rolfe, Matthias Weiss

Applied Mechanics and Materials, vol. 553, 2014, pp. 643 – 648

Testing and modeling of roll levelling process

Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdós, Joseba Mendiguren

Key Engineering Materials, 611-612, 2014, pp. 1753 – 1762

The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS

Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Lander Galdos, Matthias Weiss

AIP Conference Proceedings, vol. 1567, 2014, pp. 892 – 895

An extended elastic law to represent non-linear elastic behaviour: Application in computational metal forming

Joseba Mendiguren, Juan J. Trujillo, Fernando Cortés, Lander Galdos

International Journal of Mechanical Sciences, vol. 77, 2013, pp. 57 – 64

Influence of the number of tensile/compression cycles on the fitting of a mixed hardening material model: Roll levelling process case study

Elena Silvestre, Joseba Mendiguren, Lander Galdos, Eneko Sáenz De Argandoña

Key Engineering Materials, 554-557, 2013, pp. 2375 – 2387

Strain path's influence on the elastic behaviour of the TRIP 700 steel

J. Mendiguren, F. Cortés, L. Galdos, S. Berveiller

Materials Science and Engineering: A, vol. 560, 2013, pp. 433 – 438

A generalised fractional derivative model to represent elastoplastic behaviour of metals

Joseba Mendiguren, Fernando Cortés, Lander Galdos

International Journal of Mechanical Sciences, vol. 65, 2012, pp. 12 – 17

Influence of material's yield strength on the kinematic hardening of steels

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, Elena Silvestre

Steel Research International, SPL. ISSUE, 2012, pp. 967 – 970

Ludwik's model parameter identification for v-bending simulations with Ti64 and MS1200

J. Mendiguren, L. Galdos, E. Sáenz De Argandoña, E. Silvestre

Key Engineering Materials, 504-506, 2012, pp. 889 – 894

Roll levelling numerical simulation using a nonlinear mixed hardening material model

Elena Silvestre, Joseba Mendiguren, Eneko Sáenz de Argandoña, Lander Galdos

Steel Research International, SPL. ISSUE, 2012, pp. 1295 – 1298